Burning and temperature adjustment of zinc oxide powder

Burning and temperature adjustment of zinc oxide powder

Whether it is using zinc oxide powder for experiments or applying it in various industries, we must be careful and use it correctly, otherwise it will easily cause waste. No matter how it is used, firing and temperature adjustment are inevitable. The following is its firing and temperature regulation knowledge.

1. In the firing and temperature adjustment of zinc oxide powder, the temperature control of the feeding system at the end of the kiln must be considered. This is to ensure high-quality and stable roasting, so as to maintain its stable properties.

2. In order to improve the baking efficiency of zinc oxide powder, a special feeding method is needed, called skirt feeding. In the metering control unit, you can fine-tune the proportion of the ingredients to make the ingredients evenly and slightly move. In the temperature adjustment loop, the signal adjusted by the uniform value can prevent the material from underburning or overburning.

During the firing and temperature adjustment process of zinc oxide powder, the temperature will gradually heat up. It should be noted that it should not be heated at one time as much as possible. At the same time, pay attention to the proportion, choose the appropriate firing and temperature adjustment method, and be careful not to exceed it can withstand temperature.